What Do Air Quality Monitors Measure? A Sensor-by-Sensor Guide
Last updated: October 14, 2026 · Product details checked on Amazon.com
Quick answer: An air quality monitor is a device with small sensors that measure pollutants and conditions in the air around it. Home monitors typically measure particulate matter (PM1, PM2.5, PM10), carbon dioxide (CO2), volatile organic compounds (VOCs), humidity and temperature. Some add radon, formaldehyde, carbon monoxide, air pressure, noise or light. How useful each reading is depends on the sensor type inside.
Air quality monitor listings can read like alphabet soup: PM2.5, TVOC, HCHO, eCO2, AQI, pCi/L. Two monitors may both claim to measure “CO2” yet use completely different technology, with very different accuracy. Understanding what each reading means, and how it’s measured, is the best protection against buying a gadget that looks impressive but tells you little.
This guide defines what an air quality monitor is, walks through every common sensor, explains what the numbers mean and which ones you can trust, and shows which readings matter most for different homes.
What Is an Air Quality Monitor?
An air quality monitor is an electronic device that continuously samples the air and reports levels of specific pollutants and conditions. Home models use compact, low-cost sensors and show results on a screen, a colour light or a phone app, usually with history and alerts.
Monitors differ from air purifiers, which clean air, and from safety alarms such as smoke and carbon monoxide detectors, which are certified to sound loudly at dangerous levels. A monitor’s role is information: it tells you what’s in the air so you can decide what to do. Some can also control smart devices, switching on a purifier or fan automatically.
Professional and regulatory monitors used by environmental agencies are much larger and more expensive, with carefully calibrated reference instruments. Consumer monitors trade some precision for size and price, but good ones track real changes well enough to guide everyday decisions.
Common Air Quality Monitor Readings at a Glance
The most common readings are PM2.5 and PM10 for particles, CO2 for ventilation, TVOC for chemical gases, HCHO for formaldehyde, CO for carbon monoxide, radon in pCi/L or Bq/m³, plus relative humidity and temperature. Each uses a different sensor technology.
| Reading | What it is | Units | Common sensor type | Trust level |
|---|---|---|---|---|
| PM1 / PM2.5 / PM10 | Airborne particles by size | µg/m³ | Laser light scattering | Good for trends |
| CO2 | Carbon dioxide (ventilation) | ppm | NDIR or photoacoustic | High if NDIR |
| eCO2 | Estimated CO2 | ppm | Calculated from VOC sensor | Low |
| TVOC | Total volatile organic compounds | ppb, mg/m³ or index | Metal-oxide (MOX) | Trend only |
| HCHO | Formaldehyde | mg/m³ or ppb | Electrochemical or MOX | Varies widely |
| Radon | Radioactive soil gas | pCi/L or Bq/m³ | Diffusion chamber detector | Good over days |
| CO | Carbon monoxide | ppm | Electrochemical | Not a safety alarm |
| Humidity / temp | Moisture and warmth | % RH / °F or °C | Capacitive / thermistor | Generally good |
What Is PM2.5 and How Is It Measured?
PM2.5 is the mass of airborne particles 2.5 micrometres across or smaller — about 30 times thinner than a human hair. These particles come from smoke, cooking, vehicle exhaust, candles and dust, and can reach deep into the lungs. Monitors measure them with a small fan and a laser that counts scattered light.
PM10 covers larger particles up to 10 micrometres, such as dust and pollen; PM1 covers the very smallest. Health agencies focus most on PM2.5. The EPA’s annual outdoor standard is 9 µg/m³ and the World Health Organization’s guideline is stricter at 5 µg/m³ as an annual average. Indoors, readings in single digits are excellent, and short spikes during cooking are normal.
Laser sensors are good at showing changes — smoke arriving, a purifier working — but their absolute numbers can be off, especially in humid air or with unusual particle types. That’s why two monitors side by side may disagree on the exact figure while agreeing on trends.
What Does a CO2 Reading Tell You?
Indoor CO2 comes mostly from people breathing, so it’s a reliable indicator of how well a room is ventilated. Outdoor air is about 420 ppm; well-ventilated rooms stay under roughly 800 ppm, while closed bedrooms and meeting rooms can climb past 1,500–2,000 ppm.
At normal indoor levels CO2 isn’t toxic, but high readings mean stale air and are associated with stuffiness, drowsiness and reduced concentration. They also suggest that other pollutants people and activities produce are building up.
The sensor type is critical. NDIR (nondispersive infrared) and photoacoustic sensors measure CO2 directly by how it absorbs infrared light. Cheaper monitors often show an eCO2 value calculated from a VOC sensor, assuming that VOCs and CO2 rise together. They often diverge, leaving eCO2 figures far off the mark. When a listing doesn’t name an NDIR or photoacoustic sensor, treat its CO2 figure with caution.
What Are VOCs and TVOC?
VOCs are gases released by paints, cleaners, air fresheners, cooking, cosmetics, furniture and building materials. TVOC (total VOC) is a single combined figure. Consumer monitors use metal-oxide sensors that react to many VOCs at once, so they report a general level or index rather than specific chemicals.
Because different VOCs vary enormously in toxicity, and the sensor can’t tell them apart, a TVOC number isn’t a health measurement on its own. It’s best used for trends: a jump when you clean, cook or open a new package, then a fall as you ventilate. Many monitors, such as the Airthings range, show VOCs as a relative index for this reason. Sustained high readings with no obvious cause are a reason to ventilate more and look for a source.
What Is Formaldehyde (HCHO) and Can Monitors Measure It?
Formaldehyde is a VOC released by some pressed-wood furniture, cabinetry, flooring, glues and fabrics, especially when new. Some monitors include a dedicated HCHO sensor, but accuracy varies widely; low-cost sensors often react to alcohol and other gases and can show false highs.
Better-quality monitors, like the Temtop M2000 with its Dart electrochemical sensor, give more meaningful readings, though still not to lab standard. If formaldehyde is a serious concern — for example in a newly built or renovated home — use a monitor to track trends and consider a professional lab test for definitive numbers.
Do Air Quality Monitors Measure Radon?
Only specialised monitors measure radon. Radon is a radioactive gas from soil and rock that can build up in basements and lower floors; it’s the leading cause of lung cancer among non-smokers. Digital radon monitors such as the Airthings Wave Plus and View Plus measure it continuously.
Radon detectors count the tiny pulses of radiation from radon decay in a chamber, so they need time — typically a day for a first reading and several days to a week for a stable average. The EPA recommends action if the long-term average is 4 pCi/L (148 Bq/m³) or higher and suggests considering mitigation between 2 and 4 pCi/L.
Can Air Quality Monitors Measure Carbon Monoxide?
Some do, including Amazon’s Smart Air Quality Monitor, using small electrochemical sensors. However, they’re not certified carbon monoxide alarms and shouldn’t replace one. Every home with fuel-burning appliances or an attached garage needs UL 2034-listed CO alarms.
A monitor’s CO reading can be informative — for example, showing small increases while a gas oven runs — but life-safety devices are tested to sound at specific concentrations and durations, and have loud alarms designed to wake sleepers. Treat the two as complementary.
Why Do Monitors Measure Humidity and Temperature?
Humidity and temperature affect comfort, health and how other sensors behave. Relative humidity between 30% and 50% is ideal; above 60% encourages mould and dust mites, and below 25–30% dries skin and airways. Temperature and humidity also help monitors correct their other readings.
These are the most reliable readings on most monitors and, for many households, among the most actionable. Damp basements, steamy bathrooms and overly dry winter bedrooms are common problems that humidity data reveals. For how humidity relates to mold, see do air quality monitors detect mold.
What Is AQI on an Air Quality Monitor?
AQI (Air Quality Index) is a scale from 0 to 500 that converts pollutant concentrations into a simple score and colour. The official U.S. AQI is designed for outdoor air and specific pollutants; indoor monitors usually show their own version, often based mainly on PM2.5.
Because each brand calculates its indoor score differently, an “AQI” or “air score” on one monitor isn’t directly comparable with another or with your local outdoor AQI. It’s handy for a quick glance, but look at the underlying numbers — PM2.5, CO2 and humidity — when you need to make decisions.
What Other Things Can Monitors Measure?
Some monitors add air pressure (useful for radon and weather trends), noise and light levels (for bedrooms and offices), PM1 and PM10, ozone, nitrogen dioxide or pollen estimates. These extras are helpful in specific situations but are less important than the core readings.
Ozone and nitrogen dioxide sensors are uncommon in consumer devices and tend to be less accurate. Pollen information in apps often comes from local forecasts rather than the device itself. Read the listing carefully to see which values are measured by on-board sensors and which come from online data.
Which Readings Matter Most for Your Home?
For most homes, the most valuable readings are PM2.5, NDIR-measured CO2 and humidity. Include radon for homes with basements or in radon-prone regions, and formaldehyde or VOC if you’re renovating or buying lots of new furniture.
| Your situation | Readings to prioritise | Good fit |
|---|---|---|
| Stuffy bedrooms, home office | CO2 (NDIR) | Aranet4 or Temtop CO2 |
| Gas stove, smoke, wildfires | PM2.5 | GoveeLife H5106 |
| Basement living space | Radon, humidity | Airthings Wave Plus |
| Renovation or new furniture | VOC, formaldehyde, PM | Temtop M2000 |
| Want everything | PM2.5, CO2, radon, VOC, humidity | Airthings View Plus |
Our best air quality monitor guide compares all of these in detail.
How Accurate Are Home Air Quality Monitor Sensors?
Accuracy depends on the sensor. NDIR CO2 sensors, humidity and temperature are generally accurate. Laser particle sensors are good at relative changes but less precise on absolute values. VOC, formaldehyde and eCO2 readings from cheap metal-oxide sensors are the least reliable.
Look for brands that name their sensor suppliers and publish accuracy specifications. Compare a CO2 monitor outdoors against the expected ~420 ppm to check it, and judge particle sensors by whether they respond sensibly to cooking and fall when a purifier runs. Sensors also age; read how long air quality monitors last for typical lifespans.
How Do Monitors Turn Readings Into Advice?
Most monitors colour-code each reading green, yellow or red based on preset thresholds, and many apps add tips such as “open a window” or “run your purifier”. Some let you set your own thresholds and notifications, and smart models can trigger connected devices.
Use these colours as a starting point, but learn your own home’s patterns. Our guide on how to monitor air quality at home explains how to read trends, and why have an air quality monitor covers who benefits most.
Bottom Line: What Do Air Quality Monitors Measure?
Air quality monitors measure particles (PM2.5 and PM10), CO2, VOCs, humidity and temperature, with some adding radon, formaldehyde and carbon monoxide. The most trustworthy and useful readings are PM2.5, NDIR-measured CO2, humidity and — where relevant — radon. Choose a monitor whose sensors match the problems you want to solve. Our top all-round pick covers all four.
Frequently Asked Questions
What is a good air quality reading indoors?
Roughly: PM2.5 under 12 µg/m³ (lower is better), CO2 under about 800–1,000 ppm, humidity 30–50%, and radon under 2–4 pCi/L.
What is the difference between CO2 and eCO2?
CO2 from an NDIR or photoacoustic sensor is measured directly. eCO2 is estimated from a VOC sensor and is often inaccurate.
Do air quality monitors measure pollen?
Particle sensors count some pollen as PM10, but they can’t identify it. Pollen data in apps usually comes from local forecasts.
What does TVOC mean on an air quality monitor?
Total volatile organic compounds — a combined reading of many chemical gases. It’s best used to watch trends, not as an exact health figure.
Do all air quality monitors measure radon?
No. Only dedicated radon-capable monitors, such as certain Airthings models, measure radon.
What is PM10 vs PM2.5?
PM10 includes particles up to 10 micrometres, such as dust and pollen. PM2.5 covers finer particles up to 2.5 micrometres, such as smoke, which penetrate deeper into the lungs.
