How to Clean a Spin Mop — HomieAdvice guide cover

How to Clean a Spin Mop: Head, Bucket and Spin Basket

⚠️ Disclosure: HomieAdvice is reader-supported. When you buy through links on this page, we may earn a commission from Amazon at no extra cost to you. Learn more.

Last updated: October 13, 2026 · Product details checked on Amazon.com

Quick answer: To clean a spin mop, pull the microfiber head off the base and machine wash it in warm water with regular detergent — no bleach or fabric softener — then air-dry it. If it’s not machine-washable, soak it in warm soapy water, rinse and dry. Rinse the bucket and spin basket after every use, deep clean them with warm soapy water or diluted vinegar every couple of weeks, and let everything dry before reassembling.

A spin mop is only as clean as its head. Microfiber traps dirt brilliantly, but that dirt has to go somewhere, and a head that’s put away damp quickly starts to smell — then it spreads that smell across your floors. Buckets build up grime and slime in the spin basket and under the splash guard too.

This guide covers washing mop heads by machine and by hand, removing odors and mildew, cleaning the bucket and spin mechanism, drying and storage, and when to replace a worn head.

How Often Should You Clean a Spin Mop?

Rinse the head and bucket after every use, machine wash the head after every one to three mopping sessions, and give the bucket and spin basket a deeper clean every two weeks. Replace the head roughly every three months, or sooner if it’s matted, stained or smells after washing.

PartRoutineDeep clean
Mop headRinse and spin dry after useMachine wash every 1–3 uses
BucketEmpty and rinse after useScrub every 2 weeks
Spin basketRinse after useRemove hair and grime every 2 weeks
Handle and pedalWipe as neededMonthly check

O-Cedar, for example, recommends replacing EasyWring heads about every three months for best results. Heavy use, pets or greasy kitchen floors may wear heads faster.

How Do You Remove a Spin Mop Head?

Hold the mop upside down, grip the base firmly, and pull the microfiber head away from the base. Most spin mop heads attach with a snap-fit and come off with a firm tug. Some models have a release button or twist-lock; check the manual if it won’t budge.

Put your foot on the base or hold it against the floor for leverage if the head is tight. Wear gloves if the head is very dirty. Once it’s off, shake loose debris and hair into the trash before washing.

How Do You Machine Wash a Spin Mop Head?

Shake out debris, then wash the head on a warm cycle with a normal amount of regular liquid detergent. Skip fabric softener and bleach, which coat or damage microfiber. Wash mop heads alone or with other cleaning cloths, not with clothes or towels that shed lint. Air-dry, or tumble dry on low only if the label allows.

  1. Shake it out. Remove hair and grit over the trash.
  2. Pre-rinse if very dirty. A quick rinse stops grime clogging the washer.
  3. Wash warm. Use regular detergent and a warm cycle.
  4. No softener or bleach. Softener clogs microfiber; bleach weakens it.
  5. Wash with similar items. Microfiber grabs lint from cotton towels.
  6. Air-dry. Hang it so air reaches all strands, or tumble low if allowed.

A mesh laundry bag keeps long strands from tangling in the drum. Genuine refills such as the O-Cedar EasyWring heads are listed as machine washable and reusable.

How Do You Hand Wash a Spin Mop Head?

Fill a sink or the mop bucket with warm water and a small squeeze of dish soap, swish the head around and work the strands with gloved hands, then let it soak for 15 to 30 minutes. Drain, rinse in clean water until it runs clear, spin it dry in the bucket and air-dry completely.

Hand washing is fine between machine washes or if you don’t want mop heads in your washer. Rinsing thoroughly matters, because soap left in the strands leaves streaks on your floor next time.

How Do You Get the Smell Out of a Mop Head?

Soak the head for 30 minutes in warm water with about a cup of white vinegar, or sprinkle it with baking soda before washing. Then machine wash on warm and dry it completely in fresh air or sunlight. If a head still smells after a proper wash and dry, mildew has set in and it’s time to replace it.

Smells come from bacteria and mildew growing in damp strands. The single most effective fix is drying: never leave a wet head in a closed bucket or cupboard. Hang it outside or near an open window after use, and only store it once it’s fully dry.

Safety note: Don’t mix vinegar with bleach or bleach with other cleaners. Use one method at a time and rinse thoroughly between them.

How Do You Clean a Spin Mop Bucket?

Empty the bucket, remove the spin basket and splash guard if they lift out, and scrub all parts with warm soapy water and a brush. For grime and odors, soak or wipe with a mix of warm water and white vinegar. Rinse well and leave everything upside down to dry.

  1. Empty and rinse. Pour dirty water down a utility sink or toilet.
  2. Take it apart. Lift out the spin basket and splash guard if removable.
  3. Remove hair. Pull hair and lint from around the basket and its spindle.
  4. Scrub. Use warm soapy water and a stiff brush on the bucket floor and corners.
  5. Deodorize. Wipe with diluted vinegar or a baking soda paste.
  6. Rinse and dry. Rinse well and dry upside down before reassembling.

Pay attention to the area under the spin basket, where gritty sludge collects and can slow the spin. On two-tank systems like the O-Cedar RinseClean, clean both the clean and dirty compartments.

How Do You Clean the Spin Basket and Pedal?

Remove hair and debris wrapped around the spin basket’s center post, rinse grit from the basket holes, and wipe the pedal and its hinge. If the basket feels gritty when you spin it by hand, rinse under running water while turning it. Keep the mechanism free of buildup so it spins smoothly.

Hair wrapped around the spindle is the most common reason spin mops start spinning slowly. If cleaning doesn’t help, our guide to fixing a spin mop that won’t spin walks through other causes.

How Should You Dry and Store a Spin Mop?

Spin the head as dry as possible, remove it or hang the mop upside down, and let the head and bucket air-dry completely in a ventilated spot. Store the bucket upside down or with the head outside it. Never store a damp head inside the bucket with the lid or splash guard closed.

A wall hook for the handle keeps the head off the floor and lets air circulate. If you mop often, having two heads to rotate means one can dry fully while the other is in use — a reason the O-Cedar bundle with extra refills is popular. Compare options in our guide to the best spin mop and bucket.

When Should You Replace a Spin Mop Head?

Replace the head about every three months with regular use, or sooner if strands are matted, frayed or falling out, if it leaves streaks or lint, or if it still smells after washing and drying. A worn head pushes dirt around instead of lifting it.

Replacement heads are inexpensive, and genuine refills fit best. Using separate heads for kitchens and bathrooms is also a good hygiene habit, since it stops grime from one room ending up in another.

What Should You Avoid When Cleaning a Spin Mop?

Avoid fabric softener, bleach on microfiber unless the maker allows it, very hot dryer settings, storing heads wet, and washing mop heads with clothes. Don’t use abrasive cleaners on bucket plastics or soak the pedal mechanism.

  • Fabric softener: coats fibers so they stop absorbing.
  • Bleach: weakens microfiber; use only if the maker says it’s safe.
  • High heat: can melt or shrink microfiber strands.
  • Wet storage: the main cause of mildew and odors.
  • Mixed laundry: microfiber picks up lint and dirt from other items.

How Do You Keep a Spin Mop Fresh Between Washes?

Rinse the head in clean water and spin it dry after every use, empty the bucket immediately, and hang the mop to dry. Sweep or vacuum before mopping so the head picks up less grit. Using less cleaner also helps, because soap residue holds dirt and odors.

Mopping technique matters too. Rinsing and spinning frequently while you mop keeps the head cleaner, so there’s less to wash afterward. Our guide on how to use a spin mop covers the best technique. If you want to compare mop styles, see spin mop vs flat mop.

How Do You Clean a Spin Mop After Mopping Up Something Gross?

After mopping up pet accidents, spilled raw meat juices or other unsanitary messes, rinse the head immediately in hot water, then machine wash it on the warmest setting the label allows with detergent. Empty and scrub the bucket with hot soapy water, rinse thoroughly and let both dry completely before reuse.

For these jobs, it helps to keep a dedicated head that you don’t use in the kitchen. Wear gloves when handling the head and wash your hands afterward. If the label allows a disinfecting additive, follow its directions exactly; otherwise rely on hot water, detergent and full drying, which remove most germs from microfiber. If a head ever smells sour or musty after a thorough wash and dry, retire it rather than risk spreading odors.

How Many Mop Heads Should You Own?

Two or three heads are ideal for most homes: one in use, one drying or in the wash, and ideally a separate head reserved for bathrooms. Rotating heads means each one dries fully between uses, which is the best defense against odors and mildew, and it spreads wear so heads last longer.

Color-coding helps if your refills come in different shades, or you can mark the base of each head with a permanent marker. Keep spares in a dry, ventilated cupboard rather than sealed in plastic. When you replace heads, replace them in sets so all your heads clean consistently, and buy refills made for your exact mop so they lock onto the base properly.

Does a Dirty Spin Basket Affect How Well the Mop Wrings?

Yes, and it is one of the most overlooked links between cleaning and performance. Grit, hair and soap film collect where the basket sits on its spindle. Over a few months, that buildup adds friction, so the basket turns more slowly and leaves the head wetter than it should be. Floors then take longer to dry and streak more easily.

If wringing feels weaker than it used to, lift the basket out and look at the post underneath. A soft toothbrush and warm water usually clear it in a couple of minutes. Rinse the hole in the center of the basket too, because packed lint there can make it sit unevenly and wobble.

For pedal models, check the small gap around the pedal hinge. Dried mop water can leave a sticky residue that makes the pedal stiff. A damp cloth run along the hinge, followed by a dry one, is normally enough.

Avoid oiling any of these parts. Grease attracts more dirt and can transfer to the mop head, which then smears it across the floor on your next clean.

Bottom Line: How to Clean a Spin Mop

Machine wash the microfiber head on warm with regular detergent, no softener or bleach, and air-dry it fully. Rinse the bucket after every use, scrub the bucket and spin basket every couple of weeks, remove hair from the spindle, and store everything dry. Replace heads about every three months. Need new heads or a new mop? See our best spin mop and bucket guide.

See O-Cedar EasyWring Refills on Amazon →

Frequently Asked Questions

Can you put a spin mop head in the washing machine?

Most microfiber spin mop heads, including O-Cedar EasyWring refills, are machine washable. Use warm water and regular detergent, and skip fabric softener and bleach.

How do you get a mop head to stop smelling?

Soak it in warm water with white vinegar, then machine wash and dry it completely. If it still smells after drying, replace it.

Can you use bleach on a spin mop head?

Bleach can weaken microfiber, so only use it if the manufacturer says it’s safe. Hot water and detergent are usually enough.

How often should you wash a spin mop head?

Machine wash it after every one to three uses, and rinse and spin it dry after every mopping session.

How do you clean a smelly mop bucket?

Empty it, scrub with warm soapy water, wipe with diluted white vinegar or baking soda paste, rinse well and dry upside down.

Can you put a spin mop head in the dryer?

Air-drying is safest. If the label allows tumble drying, use a low heat setting to avoid damaging the microfiber.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *