How to Clean a Toilet Brush — HomieAdvice guide cover

How to Clean a Toilet Brush and Holder: After Each Use and Deep Clean

⚠️ Disclosure: HomieAdvice is reader-supported. When you buy through links on this page, we may earn a commission from Amazon at no extra cost to you. Learn more.

Last updated: October 14, 2026 · Product details checked on Amazon.com

Quick answer: After every use, swish the brush in the fresh flush water and wedge the handle under the toilet seat so the head drips dry over the bowl for 10–15 minutes before it goes back in the holder. Every week or two, soak the brush head in a bucket of diluted bleach (or undiluted white vinegar) for about an hour, rinse it, and scrub out the holder with hot soapy water. Let both dry fully before reassembling.

A toilet brush is the one cleaning tool most people never clean. It spends its life damp, sitting in a cup of dirty water, slowly turning grey and smelly — and then it goes back into the bowl. Keeping it hygienic takes about two minutes after each use and ten minutes every couple of weeks.

This guide covers the quick after-use routine, how to disinfect the brush with bleach, vinegar or hydrogen peroxide, how to clean every type of holder and caddy, how to stop smells and mildew, and how silicone brushes differ.

Why Should You Clean a Toilet Brush?

A toilet brush picks up bacteria, waste residue and cleaning chemicals every time it’s used. Left wet in a closed holder, it becomes a breeding ground for germs and mildew, smells bad and can spread grime back into the bowl. Regular rinsing, drying and disinfecting keeps it working and hygienic.

The holder is often worse than the brush. The water that drips off collects at the bottom, where it sits for days. That stagnant puddle is the source of most bathroom odors people blame on the toilet itself.

How Do You Clean a Toilet Brush After Each Use?

Flush the toilet and swirl the brush in the clean incoming water to rinse off residue. Tap it on the rim to shake off drips, then rest the handle between the seat and the bowl so the head hangs over the water and drips dry for 10 to 15 minutes. Return it to an empty, dry holder.

  1. Flush and rinse. Swish the head in the fresh flush water.
  2. Tap off drips. Knock it gently against the inside of the bowl.
  3. Clamp to dry. Lower the seat onto the handle so the head hangs over the bowl.
  4. Wait 10–15 minutes. Most of the water drips back into the toilet.
  5. Store dry. Put it back only once it has stopped dripping.

Some people spray the head with a disinfectant after rinsing, which is fine if it’s safe for your brush material. Never put a soaking-wet brush straight back into the holder; that’s how water pools in the base.

How Do You Disinfect a Toilet Brush With Bleach?

Fill a bucket with about a gallon of cool water, add about a third of a cup of household bleach (or the disinfecting dilution on your bleach label), and submerge the brush head for about an hour. Rinse it under the bath tap or in a fresh flush and let it dry completely. Wear gloves and ventilate the room.

You can also put the brush head-down in the toilet bowl with the bleach solution if you don’t want to use a bucket. Flush when finished. Check the brush’s instructions first: some metal handles can corrode if soaked, so keep the handle out of the solution where possible.

Safety: Never mix bleach with vinegar, ammonia or other toilet cleaners — the combination can release toxic gases. Rinse the brush and bucket thoroughly between products.

Can You Clean a Toilet Brush With Vinegar or Hydrogen Peroxide?

Yes. Soak the brush head in undiluted white vinegar for an hour to dissolve mineral buildup and reduce odors, or in 3% hydrogen peroxide for about 30 minutes as a bleach-free disinfectant. Rinse well and dry. Vinegar is better for limescale; hydrogen peroxide is the stronger germ-killer of the two.

A sprinkle of baking soda over the bristles before a vinegar soak adds some scrubbing fizz for grimy brushes. Use only one product at a time and rinse between them. If you have hard water, an occasional vinegar soak also keeps mineral crust from stiffening the bristles.

MethodSoak timeBest for
Diluted bleachAbout 1 hourDisinfecting and whitening
White vinegarAbout 1 hourLimescale and odors
3% hydrogen peroxideAbout 30 minutesBleach-free disinfecting
Hot soapy water10–15 minutesHolders and caddies

How Do You Clean a Toilet Brush Holder or Caddy?

Empty any water into the toilet, then wash the holder with hot water and dish soap, scrubbing the base and corners with an old sponge or bottle brush. Disinfect it with a bleach or hydrogen peroxide solution, rinse and leave it upside down to dry completely before putting the brush back.

  1. Empty it. Pour any standing water into the toilet and flush.
  2. Take it apart. Remove drip trays, inserts or lids.
  3. Wash. Scrub every surface with hot soapy water, especially the base.
  4. Disinfect. Wipe or soak with a disinfectant solution.
  5. Rinse. Rinse thoroughly in the bath or shower.
  6. Dry upside down. Let it air-dry fully before refitting.

Do this every week or two, or more often if you notice a smell. Keep the sponge you use for the holder only for that job, and throw it away when it’s worn.

How Do You Clean Different Types of Holders?

Open caddies and corner holders just need washing and drying. Canisters with doors, like the OXO, have removable drip trays that should be lifted out and washed. Stainless steel holders need a non-abrasive cleaner to avoid scratches, and wall-mounted holders can usually be lifted off their bracket for cleaning.

  • Open caddy: wash, disinfect, dry upside down.
  • Enclosed canister: remove the drip tray and clean the vents and hinge area.
  • Stainless steel: mild soap and a soft cloth; dry to prevent water spots.
  • Wall-mounted: lift the holder off the bracket; wipe the bracket and wall.
  • Ceramic: wash like a dish, but watch for chips.

If your holder has no drainage at all, consider upgrading to a ventilated one. Our guide to the best toilet brush and holder includes several with drip trays and drying slits.

How Do You Clean a Silicone Toilet Brush?

Silicone brushes are easier to clean because their rubber bristles don’t trap hair or debris. Rinse in the flush after use, shake off water and let it drip-dry. For a deep clean, wash with hot soapy water or soak in a bleach or vinegar solution, then rinse and dry.

Because silicone dries quickly, it’s less likely to develop mildew, but the holder still needs regular washing. Avoid abrasive powders that can roughen the silicone surface and make it hold dirt.

Can You Put a Toilet Brush in the Dishwasher?

It isn’t recommended. Putting a toilet brush in the same machine you use for dishes and cutlery is a hygiene risk, and high heat can warp plastic handles and holders. Soak and rinse by hand instead, and keep toilet-cleaning tools separate from kitchen items.

The same goes for the kitchen sink. Rinse toilet brushes and holders in the bath, shower or a utility sink, then clean that surface afterward.

How Do You Stop a Toilet Brush From Smelling?

Smells come from moisture trapped in the bristles and holder. Let the brush drip-dry before storing it, empty and wash the holder regularly, disinfect the brush every week or two, and choose a ventilated holder. If the smell persists after disinfecting, replace the brush.

Some people add a little disinfectant or a cleaning tablet to the holder, but standing liquid can still go stale. A dry holder is better than a scented wet one. Good ventilation in the bathroom also helps everything dry faster.

When Is a Toilet Brush Beyond Cleaning?

Replace a toilet brush when the bristles are flattened, splayed or permanently stained, when it smells even after disinfecting, when the head is loose, or when the handle or holder is cracked. Most brushes need replacing every few months.

A worn brush doesn’t clean under the rim properly and holds more water, so it’s both less effective and less hygienic. Our guide on how long to keep a toilet brush covers replacement timing in detail. If you find brush cleaning unpleasant, a disposable-head wand is an alternative; see toilet brush vs toilet mop and wand.

What Is a Good Toilet Brush Cleaning Schedule?

Rinse and drip-dry the brush after every use, empty any water from the holder a few times a week, disinfect the brush and wash the holder every one to two weeks, and replace the brush every three to six months.

TaskHow often
Rinse in flush and drip-dryEvery use
Check holder for waterA few times a week
Disinfect brushEvery 1–2 weeks
Wash and disinfect holderEvery 1–2 weeks
Replace brushEvery 3–6 months

Tie the deep clean to a weekly task you already do, like changing towels, so it isn’t forgotten.

What Mistakes Make a Toilet Brush Dirtier?

The biggest mistakes are storing the brush soaking wet, leaving water in the holder for days, using a holder with no ventilation, mixing cleaning chemicals during a soak, and rinsing the brush in the kitchen sink. Each one spreads germs or odors rather than removing them.

  • Wet storage: the main cause of mildew and smell.
  • Stagnant holder water: becomes a bacteria pool.
  • Mixing cleaners: dangerous fumes and no extra benefit.
  • Kitchen sink rinsing: spreads toilet germs to food areas.
  • Keeping it too long: worn bristles don’t clean and hold more water.

How Should You Clean Up After Cleaning the Brush?

Rinse the bucket or bath you used with hot water and a little disinfectant, wash and dry your gloves or throw away disposable ones, wipe any splashes on the floor and nearby surfaces, and wash your hands thoroughly with soap. Open a window or run the fan until the room smells fresh.

Store bleach and other cleaners out of reach of children and pets once you’re done. If you used a bucket, keep it only for bathroom cleaning so it never ends up being used for mopping kitchen floors or washing anything food-related. Label it if several people in the house clean.

How Do You Clean a Toilet Brush After Illness?

When someone in the household has had a stomach bug, the toilet brush deserves extra attention, because it can carry germs back into the bowl and the holder. Wear disposable gloves and work in a well-ventilated bathroom. After cleaning the toilet, rinse the brush in the freshly flushed bowl, then soak the brush head in a disinfectant prepared exactly according to its label, making sure it stays wet for the full contact time stated. Clean the holder at the same time, since moisture pooling in the bottom is where germs linger. Never mix bleach with ammonia-based cleaners, vinegar or other products, which can release harmful gases. Once the illness has passed, many people simply replace the brush; it is an inexpensive item, and a fresh start offers peace of mind.

How Do You Store a Toilet Brush Hygienically?

Storage makes a big difference in how clean the brush stays. After rinsing, wedge the handle between the toilet seat and the bowl for a few minutes so excess water drips back into the toilet instead of into the holder. A holder with ventilation slots or an open design lets the brush dry, while fully enclosed caddies trap moisture and odors unless emptied regularly. Keep the holder away from towels and toothbrushes, and place it on a surface that is easy to wipe. In households with small children or pets, choose a holder with a stable base or a wall mount so it cannot be knocked over or played with.

Are There Alternatives to a Traditional Toilet Brush?

Some people prefer options that reduce handling of a wet, used brush. Silicone brushes with flexible bristles shed water quickly and are easier to rinse clean. Disposable toilet wand systems use replaceable heads that are thrown away after each use, which some households find more hygienic, though they create ongoing cost and waste. Whatever you choose, combine it with regular toilet cleaning so the brush only has to tackle light buildup rather than heavy stains.

Bottom Line: How to Clean a Toilet Brush

Rinse the brush in the flush and let it drip-dry under the seat after every use. Every week or two, soak it in diluted bleach, vinegar or hydrogen peroxide, wash the holder with hot soapy water, and dry both fully. Replace the brush every few months. A ventilated holder makes all of this easier; see our best toilet brush and holder picks.

See the Vented OXO Toilet Brush on Amazon →

Frequently Asked Questions

How do you clean a toilet brush after each use?

Swish it in the clean flush water, tap off drips, and clamp the handle under the seat so the head drips dry over the bowl for 10–15 minutes before storing it.

How do you disinfect a toilet brush?

Soak the head for about an hour in a bucket of cool water with about a third of a cup of bleach per gallon, or use undiluted white vinegar or 3% hydrogen peroxide. Rinse and dry fully.

How often should you clean a toilet brush holder?

Empty it a few times a week and wash and disinfect it every one to two weeks, or more often if it smells.

Can you soak a toilet brush in bleach overnight?

It’s not necessary. About an hour is enough to disinfect, and long soaks can damage metal handles or weaken bristles.

Why does my toilet brush holder smell?

Water dripping off the brush pools in the holder and grows bacteria. Let the brush dry before storing it and wash the holder regularly.

Can you put a toilet brush in the dishwasher?

It isn’t recommended for hygiene reasons and because heat can warp plastic. Clean it by hand in the bath, shower or a utility sink.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *